Cable Services supply a wide range of cable termination products for medium voltage applications up to 52kV. The extensive Tyco range include heat shrinkable and cold shrink terminations for polymeric cable up to 42kv for both indoor and outdoor applications. The Tyco range also includes armour earthing using mechanical clamping rings, solderless earth connection kits, single solderless earth connections for 3 core paper and aluminium sheathed cable, heat shrink insulating boots, cold applied inline or right angled flexy boots, cable box extension glands and pole mounted support bracket and insulator termination. 3M terminations include the QT111 cold shrink system plus a range of termination accessories. The Pfisterer Connex range is suitable for medium and high voltage application typically in ring main units, circuit breaker switchgear, high voltage motors, transformers, capacitors, transducers and sealing boxes.
- Heat Shrink Selection Chart - Tyco Electronics Energy Division
Terminations for polymeric and MIND paper insulated cables from 7.2kV up to 36kV.
- IXSU-F / OXSU-F - Tyco Electronics
For polymeric cables up to 42kV. Heat shrinkable medium voltage terminations for indoor and outdoor applications.
- TFTI - TFTO Cold Applied Terminations - Tyco Electronics
For single core polymeric cables up to 42kV cold shrink medium voltage terminations for indoor and outdoor applications.
- Armour Earthing - Tyco Electronics
The armour wires of paper or plastic cables can be terminated to earth using mechanical clamping rings.
- Solderless Earth Connection - Tyco Electronics
Copper tape screens on plastic cables can be earthed mechanically by using Raychem’s solderless earth kit. The kit comes complete with a tinned copper braid and a mechanical roll spring for each conductor.
- Single Solderless Earth Connection - Tyco Electronics
For 3 core paper lead cable.
For 3 core corrugated aluminium sheathed cable.
- Heat Shrink Insulating Boots - Tyco Electronics
Set of 3 for up to 17.5kV.
- Cold Applied Inline or Right Angle ‘Flexy’ Boots - Tyco Electronics
Set of 3 for up to 17.5kV.
- Cable Box Extension Glands - Tyco Electronics
- Support Bracket & Insulators - Tyco Electronics
For up to 36kV. Pole mounted termination.
- Cold Shrink System QT111 Terminations - 3M
One piece silicone rubber.
- Termination Accessories - 3M
Cold Applied Barrier Boots 11kV
Cold Applied ‘Flexy’ Barrier Boots
Cable Box Extension Glands
11kV Earthbonding Kit
Constant Force Springs
- MV-CONNEX - Pfisterer
CONNEX MV and HV Range. 10kV to 52kV
- Raychem Screened Separable Connector System - RSTI-58 - Tyco Electronics Energy Division
800amp up to 24kV